Copyright © 2023 Dongguan Lanhe Electronics Co., Ltd. Powered by iglobalwin.com
Is a manufacturer and service provider committed to providing customers with professional, high quality and efficient silicone rubber related products solutions.
FFKM O-rings-
FFKM O-rings
Perfluorinated rubber (FFKM) O-rings due to their wide temperature range, chemical resistance in numerous corrosive applications, and long service life. LANHE offers high performance FFKM O-rings for your demanding applications. Our FFKM sealing solution uses DuPont, SOLVAY imported materials and is resistant to over 1000 different chemicals while providing high temperature stability. They are used in highly corrosive chemical processing, semiconductor wafer manufacturing, pharmaceuticals, oil and gas recovery, and aerospace applications.
Encapsulated O-rings-
Encapsulated O-rings
●FEP Teflon Encapsulated O-Rings ●PFA Encapsulated O-Rings ●FEP FKM Core Encapsulated O-ring ●Fep Encapsulated Viton MVQ O-Rings ●PTFE Fep Encapsulated O-Rings ●FEP Coated O-Rings
HNBR O-rings-
HNBR O-rings
Hydrogenated Nitrile (HNBR) o-rings, also known as Highly Saturated Nitrile (HSN), are made of a synthetic polymer that is obtained by saturating the double bonds in nitrile=s butadiene segments with hydrogen. This special hydrogenation process reduces many double bonds in main chains of NBR polymers. This process results in the superior heat, ozone, chemical resistance and mechanical characteristics of HNBR over standard Nitrile. HNBR o-rings are available in 70 durometer, 80 durometer, and 90 durometer.
Automobile Rubber Components-
Automobile Rubber Components
Automobile Rubber Components. Mainly used in these modules, Fastening sub-assemblies, shock/vibration absorption and noise cancellation assemblies, supporting drive shafts and absorbing frequent vibrations during repeated movements, rubber and plastic assemblies for guiding and protecting cables and other components, air duct system assemblies, assembly and evacuation requirements for air and fluid ducting systems, support and vibration cancellation supports, etc
TG Oil Seal-
TG Oil Seal
The difference between TG oil seal and standard rotary shaft oil seal is that TG oil seal has a special corrugated outer diameter design. Tg oil seal is an improved general type oil seal. It can replace TC, TB, VB, VC, SB, TC4, DKB and other oil seals. Internal design 3 lips, sealing performance is good. It is especially suitable for applications where the shell material is subjected to large thermal expansion, i.e. the aluminum shell.
Standard Shaft Oil Seal-
Standard Shaft Oil Seal
Standard shaft oil seal, conforming to DIN 3760 - SIMMERRING type, models include BA, BASL, BAOF, BAUM, BAUMSL,A,AS,B,BS,C,CS and many other models. Metal case and spring loaded, with sealed lip profile, support a variety of custom sizes. The standard shaft seals include the most recent profiles, standardised by ISO 6194, DIN 3760 or DIN 3761. They are generally pressure-free and come in different design shapes depending on the type of fluid, level of external pollution, qualities of the shaft and housing (hardness, surface roughness, material), speed, temperature, etc.
Piston Oil Seal-
Piston Oil Seal
Hydraulic Seal PTFE SPGO Glyd Ring PTFE GSJ Glyd Ring Pistion Rod seal
TC Oil Seal-
TC Oil Seal
Lanhe brand TC oil seal is a low pressure double lip radial seal with garter spring to provide protection from contaminants. Rubber outer diameter improves outer diameter sealing ability. The inner surface of the steel shell is not completely covered with rubber. Extra Dust Lip Protection Primary Seal lip protection against dust and other contamination. The seal can be used in contaminated environments. In order to maximize the service life of the seal, adequate lubricant should be applied between the two seal lips.
Gamma Oil Seal-
Gamma Oil Seal
Axial face seal (Gamma Seal) manufactured by lanhe is a combination of metal casing and rubber lip seal. Gamma seal can be used in greasy and dirty environment as a primary sealing solution and can also acts as an auxiliary dirt seal that helps protecting bearings and radial seals from water, dirt, grease, moisture, and other contaminants.The rubber part is usually made of nitrile butadiene rubber and FKM, and the metal part is made of steel aisi 1010, Available in 9RB and RB type,The 9RB profile is a gamma seal. The design of the metal part offers additional protection in the form of a labyrinth in the housing,should there be a higher pollution levels compared to the RB profile.
FKM O-rings-
FKM O-rings
Fluorine rubber seal ring (FKM/FPM) is made of ethylene fluoride and hexafluoropropylene copolymer elastomer. FKM (United States) and FPM (Europe) are both abbreviations of vinylidene fluoride fluoroprene, which vary only by region. Because of its excellent performance, fluorine rubber has been more and more widely used, well solve the problem of sealing under harsh conditions. With the continuous improvement of fluorine rubber manufacturing process and in-depth study of its application, this sealing material with the best comprehensive performance is bound to be popularized and applied in more fields in the future.
FFKM O-rings-
FFKM O-rings
Perfluorinated rubber (FFKM) O-rings due to their wide temperature range, chemical resistance in numerous corrosive applications, and long service life. LANHE offers high performance FFKM O-rings for your demanding applications. Our FFKM sealing solution uses DuPont, SOLVAY imported materials and is resistant to over 1000 different chemicals while providing high temperature stability. They are used in highly corrosive chemical processing, semiconductor wafer manufacturing, pharmaceuticals, oil and gas recovery, and aerospace applications.
Encapsulated O-rings-
Encapsulated O-rings
●FEP Teflon Encapsulated O-Rings ●PFA Encapsulated O-Rings ●FEP FKM Core Encapsulated O-ring ●Fep Encapsulated Viton MVQ O-Rings ●PTFE Fep Encapsulated O-Rings ●FEP Coated O-Rings
HNBR O-rings-
HNBR O-rings
Hydrogenated Nitrile (HNBR) o-rings, also known as Highly Saturated Nitrile (HSN), are made of a synthetic polymer that is obtained by saturating the double bonds in nitrile=s butadiene segments with hydrogen. This special hydrogenation process reduces many double bonds in main chains of NBR polymers. This process results in the superior heat, ozone, chemical resistance and mechanical characteristics of HNBR over standard Nitrile. HNBR o-rings are available in 70 durometer, 80 durometer, and 90 durometer.
Automobile Rubber Components-
Automobile Rubber Components
Automobile Rubber Components. Mainly used in these modules, Fastening sub-assemblies, shock/vibration absorption and noise cancellation assemblies, supporting drive shafts and absorbing frequent vibrations during repeated movements, rubber and plastic assemblies for guiding and protecting cables and other components, air duct system assemblies, assembly and evacuation requirements for air and fluid ducting systems, support and vibration cancellation supports, etc
TG Oil Seal-
TG Oil Seal
The difference between TG oil seal and standard rotary shaft oil seal is that TG oil seal has a special corrugated outer diameter design. Tg oil seal is an improved general type oil seal. It can replace TC, TB, VB, VC, SB, TC4, DKB and other oil seals. Internal design 3 lips, sealing performance is good. It is especially suitable for applications where the shell material is subjected to large thermal expansion, i.e. the aluminum shell.
Standard Shaft Oil Seal-
Standard Shaft Oil Seal
Standard shaft oil seal, conforming to DIN 3760 - SIMMERRING type, models include BA, BASL, BAOF, BAUM, BAUMSL,A,AS,B,BS,C,CS and many other models. Metal case and spring loaded, with sealed lip profile, support a variety of custom sizes. The standard shaft seals include the most recent profiles, standardised by ISO 6194, DIN 3760 or DIN 3761. They are generally pressure-free and come in different design shapes depending on the type of fluid, level of external pollution, qualities of the shaft and housing (hardness, surface roughness, material), speed, temperature, etc.
Piston Oil Seal-
Piston Oil Seal
Hydraulic Seal PTFE SPGO Glyd Ring PTFE GSJ Glyd Ring Pistion Rod seal
TC Oil Seal-
TC Oil Seal
Lanhe brand TC oil seal is a low pressure double lip radial seal with garter spring to provide protection from contaminants. Rubber outer diameter improves outer diameter sealing ability. The inner surface of the steel shell is not completely covered with rubber. Extra Dust Lip Protection Primary Seal lip protection against dust and other contamination. The seal can be used in contaminated environments. In order to maximize the service life of the seal, adequate lubricant should be applied between the two seal lips.
Gamma Oil Seal-
Gamma Oil Seal
Axial face seal (Gamma Seal) manufactured by lanhe is a combination of metal casing and rubber lip seal. Gamma seal can be used in greasy and dirty environment as a primary sealing solution and can also acts as an auxiliary dirt seal that helps protecting bearings and radial seals from water, dirt, grease, moisture, and other contaminants.The rubber part is usually made of nitrile butadiene rubber and FKM, and the metal part is made of steel aisi 1010, Available in 9RB and RB type,The 9RB profile is a gamma seal. The design of the metal part offers additional protection in the form of a labyrinth in the housing,should there be a higher pollution levels compared to the RB profile.
FKM O-rings-
FKM O-rings
Fluorine rubber seal ring (FKM/FPM) is made of ethylene fluoride and hexafluoropropylene copolymer elastomer. FKM (United States) and FPM (Europe) are both abbreviations of vinylidene fluoride fluoroprene, which vary only by region. Because of its excellent performance, fluorine rubber has been more and more widely used, well solve the problem of sealing under harsh conditions. With the continuous improvement of fluorine rubber manufacturing process and in-depth study of its application, this sealing material with the best comprehensive performance is bound to be popularized and applied in more fields in the future.
FFKM O-rings-
FFKM O-rings
Perfluorinated rubber (FFKM) O-rings due to their wide temperature range, chemical resistance in numerous corrosive applications, and long service life. LANHE offers high performance FFKM O-rings for your demanding applications. Our FFKM sealing solution uses DuPont, SOLVAY imported materials and is resistant to over 1000 different chemicals while providing high temperature stability. They are used in highly corrosive chemical processing, semiconductor wafer manufacturing, pharmaceuticals, oil and gas recovery, and aerospace applications.
Encapsulated O-rings-
Encapsulated O-rings
●FEP Teflon Encapsulated O-Rings ●PFA Encapsulated O-Rings ●FEP FKM Core Encapsulated O-ring ●Fep Encapsulated Viton MVQ O-Rings ●PTFE Fep Encapsulated O-Rings ●FEP Coated O-Rings